How To Clean Mold

If you have had allergies for sometime now for no apparent reason, then you might be inhaling mold and not even realize it. Before the infection gets worse, let’s try to look at some ways in which we can clean mold and remove it from our homes.

Vinegar can be sprayed in places where mold grows easily. It can be used under the faucets, on shower curtains, and can even be used to mop the kitchen or bathroom floor. Chopping boards, dish drainers, or other places that constantly used when eating can also be sprayed on with vinegar to prevent the growth of mold. Other natural products are dishwashing liquid that have lemon, aloe and citrus which can also help get rid of mold.

Other acids like borax (boric acid) and hydrogen peroxide are very effective too, although most people don’t prefer to use these, especially those sensitive to the smell. When mixing other acids with bleach, remember this safety tip: never mix ammonia and detergent bleach, as this can create a very poisonous gas. When using bleaching solutions like Clorox, make sure the area is well ventilated. If you are using fns to increase the flow of air in the whole place, make sure that the air is directed to the opposite direction of the breathing region.

If the mold has penetrated other items in the household like carpets, then you should either throw them out, or hire professionals to clean  mold on carpets, if you still want to save them. Make sure that the carpet is be dried in less than 24 hours too. Air cleaners, or air dehumidifiers are also available to clean  the mold that may be wafting about in the air, although they are insufficient for thoroughly making the whole area mold-free. If mold in your carpet has been a problem longer than usual, then you have two choices: either replace the carpet with hardwood flooring, or dust the carpet with baking soda, then vacuum it off afterwards.

If discoloration is common to walls, doors, and ceilings, then check your home for combustion problems. Fuel burning appliances like the stove, clothes dryer and the furnace can cause the back drafting of air. These can also be sources of mold growth, and in this case, you had better consult the help of professionals to help you assess the problem and keep your home well-ventilated.

Another important thing to bear in mind when you attempt to clean mold is to consider wearing protective equipment. Since you are in touch with harmful substances, make sure you have your gloves, respirator, and goggles ready. These will protect you from inhaling the mold which can cause respiratory problems, and it coming in contact with your skin which can cause skin rashes. If you think you can’t control the mold by yourself, it is best to contact companies that provide mold cleaning services to fully get rid of the problem. They will not only help you clean  out the mold, but also give out other tips and ideas on how to maintain a mold-free home.

How To Get Rid Of Mold In 5 Steps

Mold is defined as the microscopic organisms or fungi that have the facility to develop on nearly every surface like plants, carpet, and papers, concrete and winter insulation. Also, it can grow on your home’s ducts.  Most molds are usually not unsafe, but one type of mold – black mold -  is extremely harmful to your health which is why learning how to get rid of mold can be very important to homeowners today.

According to current research, black mold can contribute to critical health issues like  Fibromyalgia, rashes,  allergies, sinus infections, headache, asthma, and other respiratory problems.  Moreover, Stachybotrys mold can bring about serious pulmonary disorders.

The higher the concentration of mold and the more time you are exposed to it, the more critical the problem will be.  If you become aware of any of these situations with your surroundings, then you can be in danger.

•    Signs of water on the walls
•    Musty smell
•    Carpet or stuffing in straight contact with cement slab
•    Drippings under the sink, unfastened bathroom seals, fissures in caulking or shower tile
•    Black dots or discolorations on wallpaper or walls.
•    Humid crawl spaces or basement
•    Unclean or not properly maintained air conditioning, filters and heating vents

Here are some steps on how to get rid of mold:

Step 1 - Learn what kinds and quantity of mold that you have.  To do this, you will need test kits which are obtainable at most hardware stores, supermarkets, home centers, on-line stores and pharmacy outlets. Through insertion of Petri dishes that comes with the kit in strategic places where you think mold grows, a sample can be attained and sent to a specified lab for testing in order to make out the precise number and kind of the mold that develop there. Mold spores can possibly be stimulated and be emitted through sitting on the sofa where molds are, vacuuming, or by just walking on a carpet. For that reason, you must put on face mask and rubber gloves, when getting in contact with things that you sense is a black mold.

Step 2 - Get rid of the base of the mold. The chief cause of mold expansion is moisture. Fix any leaks in the basement, walls or roof.  Prevent moisture on your floors or behind the walls. Apply a deep penetration concrete sealer in your foundation slabs or basements. Keep in mind, that applying paint on surfaces will not prevent mold from coming back. Use dehumidifier to lessen humidity around your home to avoid moisture.

Step 3 – Make use of a fungicide cleaner to take off mold from surfaces since chlorine bleach will not permanently eliminate mold. Scrub clean your refrigerator inside and out plus the evaporator tray, coils and gaskets. Use protection gears when cleaning.

Step 4 - Mount an air purifier in your home and have your duct work tidied up by an expert.

Step 5 –Avoid storing up of paper, cloth, wood and other porous objects in your basement.

These steps teach you how to get rid of mold so you and your family can live in a clean and mold free home.

Cleaning Mold Naturally

Molds have been in existence ever since the beginning of the world. It is caused by fungus and it comes in a range of colors and forms. There are factors that can ignite its growth and the mold’s spores can cause it to spread. In order to thrive and survive, mold has to have a supply of food, moisture, and wetness.  Anyone who has mold in their home, will agree that getting rid of it is a priority, but not everyone wants to use harsh cleaners to do so.  Luckily, there are a couple of methods of cleaning mold naturally that you can try.

Mold is found indoors as well as outdoors.  Normal spots where mold shows up are carpets, wood, ceilings, painted spaces and wallpaper. It is also rather ordinary to discover it in areas like the bathroom or basement. There are a few kinds of mold which are toxic and understandably, can pose a serious threat to human health; for this reason, it is very important to get rid of them. Individuals can acquire some allergies from mold and one can experience a lot of symptoms which include headache, sneezing, red and itchy eyes and sneezing.

Fortunately, there are ways to eliminate them and it’s quite easy to do. In fact, cleaning mold naturally is something that you should opt for because it is safer than the commercial alternatives. The most common natural cleaner for mold is vinegar. In this process, make use of a bottle with sprayer to spray vinegar onto the area where mold is present such as seals on faucets and tile grout. Mold is capable of growing in any places inside your home so make sure to inspect areas specially the highly mold prone part of your house such as the kitchen cabinets which is the perfect place for mold to cultivate.

A handy air conditioner is a very practical appliance to have in your home. Throughout the humid and hot weather it will be of assistance to bring an end to growth of mold inside your home. The humidity must be maintained at just about thirty to fifty percent to be beneficial.

During the cold winter months, a dehumidifier is preferable to combat the development of mold in the home. Yet again, the humidity temperature must be sustained to around the thirty to fifty percent mark; however the humidity must still be at an agreeable level for your room.

Carpet is one of the mold’s favorite places to grow into.  If you discover that mold has grown on your carpet you can try to clean mold naturally with baking soda. To do this, sprinkle the baking soda all over the carpet, let it on for several hours, vacuum afterwards to completely take the baking soda off. Other effective natural remedies to clean mold are tea tree oil and grape seed extract.

If the onset of the mold is extensive, then the best thing to do is to call for professional help to solve the problem. There is a small chance that any remaining airborne mold spores can cause it to come back, in this circumstance, another treatment may be required.

Mold infestation in your home shouldn’t be left unattended because some types of mold can be very hazardous to your health. It is highly suggested that once you know you have mold, that you take steps to clean it up right away.

How To Clean Mildew

Mildew can show up on most anything, but we often find ourselves trying to clean mildew from fabrics and paper items.   It requires dampness and a specific temperature to develop which is why we often find it on items in our basement or out on the patio. Mildew grows on anything damp like paper, leather, linen, wood, cotton, silk and rayon fabrics. It usually expands in the moist summer climate, particularly in houses that are shut-up and dark. It also like spaces where there is no fresh air. This means that closets, air conditioner ducts, crawl spaces and cellars are the places where mildew is most likely to be found.

The most common places to find mildew in the house are shower curtains, damp clothes, rugs, draperies and your bathtub caulking.  Mildew has a distinct smell and often stains paper, fabrics, and leathers. If left to it’s own, it will eat the entire piece of fabric. Deterioration and staining caused by mildew is irreparable.
In order to ward off mildew:

1.    prohibit the spores or the moisture that are essential for germination by means of keeping the humidity of your homes under control, if possible keep the humidity at forty five percent and fifty five percent but not higher than sixty five percent.
2.     Dehumidifiers installed within your home may be necessary.
3.    Install fans to make sure to that the air will keep circulating.
4.    Try to sustain a temperature of sixty four to sixty eight degrees Fahrenheit.
5.    Patch up trickling gutters, waterspouts, pipes, cracked windows, holes on the roof, broken down brickworks, and splintered walls.
6.    Tidiness of the surroundings is helpful since piles of clutter nurtures spores.

To Clean mildew from surfaces:

1.    Scrub tiles of bathrooms and walls with a diluted solution of chlorine bleach, for every one gallon of water add one cup of bleach. After scrubbing, rinse thoroughly with water and then wipe to dry. Be sure that the windows are not close until the tiles have dried out.
2.    Include silica gel in the box or container where you will store items to keep out moisture.
3.    Sprinkle chlorinated lime or bleaching powder on the floors of the basement then sweep it up after the musty smell fades. Also, increase air circulation and heat to avoid moisture.

Cleaning Bathroom Caulk:

1.    Mildew may be taken off bathroom walls and bathtub caulk in as much the same way. If the mildew has penetrated the surface, it might be best to remove the old caulk and recaulk as it will just keep coming up to the top again.
2.    Paint bathroom walls with high gloss finish not matte to lessen the chance of mildew development.
3.    For tile grout, spray a mildew remover to take off mildew.

Cleaning furniture:

1.    Make sure to varnish and seal wooden furniture.
2.    Coat unfinished wood with a paste wax.
3.    All wicker and wood furniture must be brought inside the house during winter, with the exception of cedar and teak furniture.
4.     Clean mildew in fabric cushions by spraying it with the solution of borax, detergent and warm water. Completely rinse after a few minutes.

Black Mold Health Issues

When you think of mold, you think of it infecting your house  - your tiles and grount and the rooms of your house like basements, attics, and bathrooms. The sense of sight as well as the sense of smell can be used to detect if you have mold in your home early on, as molds can be determined by the discoloration(usually yellowish, brownish or blackish) and the musty odor.

Of all the kinds of mold, black mold health issues pose the highest risk, so we have to be alert for this slimy greenish-black substance. Black mold is commonly found on soaked wood and ceiling tiles. It can also grow on insulation and drywalls. If one were to touch black mold, it would feel slippery and would smudge a bit.

Black mold is serious because it can have adverse effects to your health.

Mold effects different people differently. Some people may have acute reactions to it, while others have little or none at all. Since mold spores are so small and can’t be seen by the naked eye, we don’t know if we are already inhaling them. People who have a history of asthma and other breathing problems are more sensitive to mold; therefore, should be more careful. People who have weaker immune systems should also be wary of this toxic mold, because they are more susceptible to mold infection.
The black mold health issues are many and varied.  Mold spores can be inhaled or ingested through food and can lead to various health risks and illnesses like asthma, upper respiratory problems, sinusitis, dry cough, skin rashes, upset stomach problems, headaches, itchy eyes, breathing difficulties, runny nose, disorientation, skin sores, chronic fatigue and nose bleeding. Severe exposure to mold can even lead to internal bleeding, kidney, or liver failure. The best way to handle mold infections is by consulting a doctor on the early signs which might include sneezing or itchy eyes after mold exposure.

Natural disasters like tornadoes, hurricanes and floods can add to mold formation, so if your family is moving to a new place that has recently experienced these calamities, make sure to clean the whole place, especially where there can be leaks, before moving in. To prevent mold growth, make sure to clean wet surfaces, and throw out wet materials, especially after a flood or leaks in the plumbing, because sometimes even dead mold spreads germs. When eliminating black mold, one should be very cautious because by simply wiping and scraping it off, you increase the risk of spreading the spores through the air.

Luckily, there are a number of ways to avert mold manifestation. By using adequate ventilation and moisture, mold killing products available at home depot stores, and of course, keeping the house clean and free from humidity you can keep your mold population down. Disinfectants like soap and bleach can also be used to wipe off any mold that starts to form and you can also use white vinegar if you don’t like to use harsh chemicals.  As the adage goes, “An ounce of prevention is worth a pound of cure” and doing what you can to prevent these black mold health problems is well worth the effort.

Types of Mold

There are several thousand types of mold in our environment, but we typically see about 10 species of mold in our homes.  Mold can be found in homes, schools, and businesses.  If left unchecked, mold can cause several health problems for both humans and animals, with some of them being pretty severe.

Common Types of Mold

1)    Aspergillus – this is the most prevalent type of mold known to cause health problems in humans.  It is the most likely to cause allergic reactions.  It is dispersed via your air conditioning and heating systems.  Most people hospitalized with symptoms related to mold poisoning have been exposed to this type of mold.
2)    Cladosporium – This mold is found most often attached to wallboard, food, paint, dead plants, dirt, and fiberglass ducts.  It will appear to be black or dark green in color.  It is a powdery mold that will brush off and disperse into the air when disturbed.  People exposed to this mold may develop skin rashes, asthma, sinus problems, nail fungus, chronic cough, and sometimes pneumonia.
3)    Penicillium – Mold of this type is found in food, paint, carpet, fiberglass duct insulation, soil, grains and rotting vegetation.  Humans who have been exposed to this mold often show asthmatic symptoms, to name a common one.  Certain species of these fungi have the ability to produce mycotoxins, which can cause severe health problems such as liver and kidney damage.
4)    Stachybotrys – this fungus is better known as black mold.  One of the most toxic molds, black mold has a slimy consistency and is black in color.  Mycotoxins are produced by black mold and have been known to cause severe health problems in humans including fatigue, a compromised immune system, cancer, and asthma.  Black mold can be found in any indoor environment where prime conditions exist in the wake of a flood, water damage, or water leaks.

Other types of mold include Cladosporium, Alternaria, and Fusarium.  Each mold type, no matter what the species, has the ability to cause health difficulties and should be eliminated as soon as possible.  Mold also has the ability to destroy a homes’ structure, so that is another reason to get rid of mold in a timely manner.

Mold usually causes health problems before it is ever seen in the home.  Mold can be hiding behind walls and underneath appliances.  Pay attention if you detect a musty or mildew smell in your home.  Begin taking measures to look further than the surface of walls and baseboards to check for possible mold growth.

Once mold is eliminated and the home has been properly cleaned or had drywall, carpet, or furniture replaced, it is vital to keep mold from developing inside the home again.  Stick to a regular cleaning schedule.  Make sure to clean up any standing water and fix water-damaged areas as soon as possible.

Several types of mold are naturally present in our outdoor environment and do serve a purpose when it comes to rotting wood and vegetation.  However, in order to keep health problems at bay, it is important to inhibit mold growth inside the home, schools, or businesses.

Removing Mold

Removing mold from your home and your belongings following a natural disaster such as a flood, hurricane, or tornado can seem daunting. It can prove to be a long process, but there are several steps that you as a homeowner can take to get rid of the mold that is likely beginning to develop in your water-damaged home.

Mold can be a health hazard, so remember to always wear protective clothing, gloves, safety glasses, and a mask when you’re cleaning up your home and belongings. Always work in a well-ventilated area when possible. If the mold has progressed rather quickly and is prolific, you might consider leasing a respirator to wear during the clean up process, especially while pulling up carpet or replacing drywall.

Some molds are more of a powdery substance rather than a slimy one. To keep the mold from dispersing when touched, be sure to sprinkle water over the moldy areas before beginning the cleaning process. Mold spores travel in the air, so if they are disturbed, they’ll go airborne and possibly cause more of a health problem.

Carpets that have been through a flood really don’t have a chance of being saved. Mold gets into the fibers of the carpet and deep into the padding and can’t be removed simply by cleaning or steaming the carpet. The best course of action with carpet is to pull it all up, place it in a bag, seal it, and put it on the curb for trash day. Prior to laying down new carpet and padding, you’ll need to completely disinfect the surface, whether it is wood or concrete.

Effectively removing mold from drywall is also virtually impossible. The best course of action is to remove all waterlogged drywall and then go another foot up and remove that section as well. This way, you’ve eliminated the possibility of the mold seeping further up into the wall and reproducing again after the repairs are completed.

Wood furniture or wood structures within the home can be scrubbed to remove the mold. In some cases, if the wood is untreated and the mold has gone into several layers of the wood, sanding may be necessary in order to remove all the mold.

Leather on furniture or other items affected with mold can often be cleaned using a moist cloth and a solution of 1-cup water to 1-cup denatured alcohol. Wipe with the solution first and then dry it with a clean towel.

A bleach and water solution is always a must for disinfecting your home once the mold has been removed. Use one gallon of water with ¼ cup of bleach added to sanitize appliances, bathrooms, kitchens, and floors. You can rinse with fresh water and then dry with a clean towel or rag.

Once you have finished cleaning and disinfecting your home, throw away any rags, towels, gloves, or masks used when removing mold from your home and furniture. Seal them inside a garbage bag and put them into the trashcan.

Removing mold from your home after a natural disaster or water leak can seem like a never-ending task. It simply takes time and patience to allow things to dry out and then to disinfect them properly. If you feel at any time you may not have eliminated the mold, professionals are available to assist you in this area to ensure you won’t have mold returning in your home once repairs have been completed.

Mold Exposure

Prolonged exposure to mold can prove to be a serious health hazard to some people.  One person may not be affected at all, whereas another has difficulty breathing and functioning properly.  For those with damaged or inhibited immune systems, mold exposure can be life threatening.  Elderly people and infants are especially susceptible to the effects of mold.

What are some of the symptoms of mold exposure?  One symptom is an unexplained skin rash.  Another is red, irritated, and watery eyes.  Other symptoms that may indicate you’ve been exposed to mold for a period of time might include headaches, fatigue for a prolonged time, a sore throat, asthma-like symptoms such as shortness of breath, or a bleeding nose.

There are severe health issues resulting from exposure to mold for a prolonged time.  Perhaps you work in an office, day care, church, or factory that has mold issues.  Over a period of time, your immune system can actually break down from the affects of mold in the body.  Some of the severe symptoms include:
·    Nausea
·    Diarrhea,
·    Ear infections
·    Frequent sinus infections or bronchitis
·    Hair loss
·    Coughing up a black substance or blood or both
·    Vomiting
·    Chronic fatigue
·    Difficulty breathing
·    Constant migraine headache
·    Open sores on areas of the skin
·    Sexual difficulties

If you suspect that you are suffering from exposure to mold, it’s important to track how you feel and where you are when you experience the symptoms.  It’s possible that your workplace, home, day care, or school is harboring mold and is not aware of the problem.  Let’s say the symptoms listed above are present only when you are at work and then dissipate when you return home.  Be sure to let your boss and your physician know where the symptoms are occurring the most.

If you discover that your home has mold issues, treat them as soon as possible.  In the event you find that your child’s school or day care has mold issues, notify them as soon as possible so the issues can be remedied.  Some parents may choose to pull their child from the affected environment until the mold has been removed.

Mold removal can prove to be a real challenge when it comes to commercial and residential structures.  However, there are steps that can be taken to make great strides toward making the building healthy and free of mold.  Don’t settle for less than the best efforts to make your child’s school or day care mold free.

Symptoms exhibited when someone has been exposed to mold can mimic other health problems.  Asthma-like symptoms can indicate both an asthma attack or an allergic reaction to mold.  That is why tracking where your symptoms occur can be very helpful.

Mold exposure is a very serious health hazard; so if you are experiencing several of these symptoms for no other apparent reason, don’t allow anyone to tell you you’re imagining things.  Make an appointment with your physician right away.  Some adults and even some children have died as a result of prolonged exposure to mold.  This possible health hazard needs to be handled with care and sobriety.  Make sure your physician or pediatrician understands your concerns.

How to Kill Mold

More people today than ever before are suffering ill effects from inhaling mold in their home, office, or school.  Allergy symptoms can be mild or severe, depending on the length of time someone has been exposed to mold.  Mold is everywhere and occurs naturally in the outdoors.  However, since mold spores are airborne constantly, inevitably, mold finds its way into our homes.  If you are wondering how to kill mold, read further.

Mold loves moisture and dark places.  The number one way to get rid of mold is to control the humidity and moisture levels inside your home.  If you do that, then everything you do in addition will be more effective.  If you don’t control the moisture in your home, mold will return, despite your best cleaning efforts.

How to Control Moisture in the Home

Invest in a quality dehumidifier with a HEPA filter and place it in your basement, sunroom, or any other room that seems to gather the most moisture.  Air purifiers seem to help with mold issues too, but a dehumidifier will take the excess water in the air and deposit it into a collection bucket, which is then discarded.

Air flow is also a key component when it comes to controlling the moisture level in your home.  Bathrooms should always be outfitted with a fan, whether they are in the main house or in the basement.  Make sure basements and attics have good ventilation as well.

Leaky pipes can continue to provide moisture for mold growth, even with a dehumidifier in place.  Inspect your home for leaky faucets or pipes and fix any that have problems.  A professional plumber can check behind walls to make sure no water is escaping in those areas.

How To Kill Mold

Once you’ve effectively controlled the moisture in your home, it’s time to kill any residual mold that may have been left behind.  In any areas where mold is visible, spray it with water to keep the mold from going airborne.  A bleach water solution can be used to clean and disinfect surfaces.  However, if you are sensitive to bleach, there are all natural options available that are just as effective.

Your local health food store is a great resource for natural ingredients to kill mold.  Tea tree essential oil works as a fungicide and has shown to be effective for killing mold across the board.  It is on the costly side and does have a strong smell, but that seems to disappear within a short period of time after cleaning.  Simply mix a few teaspoons of tea tree oil with 2 cups of clean water in a spray bottle and apply to any areas affected with mold.

If you prefer a fragrance free natural ingredient for killing mold, grapefruit seed extract is a great choice.  Add roughly 20 drops of grapefruit seed extract to 2 cups of water and treat the moldy areas.

Plain white vinegar can be found in your local grocery store and is the least expensive of the three options, and it can be used without adding water.  Pour white vinegar directly into a spray bottle and then apply to the areas affected with mold.  This will leave a scent, but it will disappear within a few hours after application.

Now you know how to kill mold effectively in your home.  Get rid of the sources of moisture, or control the moisture levels in your home.  Then, clean everything from the ceilings to the floors and everything in between.

How To Get Rid of Mold

The very mention of mold makes most people grimace.  Not only is mold unsightly, it can pose a real health hazard if left untreated.  If you’ve ever wondered how to get rid of mold, here are several tips for ridding your home of mold once and for all.

High humidity and the moisture that creates is the reason mold can form.  If you have a water leak that goes untreated, mold can form in that area as well.  In order to get rid of mold, you must first determine how to rid your home of the moisture and then treat the affected area.  This may involve purchasing a dehumidifier or fixing a water leak.  Basements and cellars are often moist on a regular basis and can benefit from a dehumidifier running consistently.

Bathrooms and Kitchens

Although there are several products on the market today that are effective, an all- natural mold cleaner is plain white vinegar.  You’ll avoid potentially harmful chemicals in your home and lungs by using white vinegar.  In the bathroom, use a spray bottle filled with white vinegar and spray it directly onto tub tile, the shower curtains, and faucets.  The floor can be mopped or wiped down with vinegar too.  White vinegar can also be used in the kitchen.  Spray down dish strainers, cutting boards, counters, and appliances and even inside the dishwasher.  White vinegar will not only get rid of mold, but will inhibit growth when used consistently.

Carpets and Rugs

Baking soda is another great all-natural item to have in your cleaning tub.  Carpets and area rugs are notorious for holding onto moisture, dirt and other particulates from the air.  If you’d like to know how to get rid of mold in your carpet, here is your answer.  Sprinkle baking soda on your carpet and allow it to sit for several hours.  This could easily be done before you leave for work in the morning or at a time when you’ll be running errands.  The baking soda will naturally soak up moisture and dirt, essentially trapping it.  Vacuum your carpet as you would normally and you’ll be eliminating mold at the same time.

Glass, Metal, Plastic, and Ceramic

Mold on these non-porous surfaces can be eliminated with a solution of bleach and water.  Use this solution to wash walls, windows, doorframes, or baseboards.  Ceramic tile floors affected by mold respond well to this treatment as well.

Furniture

Mold can be very damaging to furniture.  Contact a professional to find out how to eliminate the mold in or on your furniture.  Depending on the materials from which the furniture was manufactured, it may be possible to have it cleaned, or it may need to be replaced.

Mold loves moisture, so make sure to check and change your home air filters on a regular basis.  It’s a good idea to have your home’s ductwork checked periodically as well.  Otherwise, mold could be spread throughout your home by your very own heating and air conditioning systems.

Mold can be a real issue in a home and can cause allergy-like symptoms for some people, such as sniffling, coughing, or sneezing.  If you discover or suspect mold in your home, find out how to get rid of mold and then prevent its return by using these simple tips.

« Previous Page — Next Page »